12
MXT40-M2 APEX TRAINER
NO.4 Screw (M8×55) × 8pcs
NO.6 Flat Washer (D8) × 8pcs
NO.72 Screw (ST4.2×20) × 2pcs
NO.73 Screw (ST4.2×12) × 4pcs
NO.5 Spring Washer (D8) × 8pcs
Wrench × 1pc
4
73
70R
70L
72
73
73 72
73
5
6
4
1
3
5
6
2
3
ASSEMBLY INSTRUCTION
3.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the
assembly in the order given.
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Assembly of the Stabilizers and the Covers
1. Mount the front stabilizer (2) and the rear stabilizer
(3) to the main frame (1) with four screws (4), four
spring washers (5) and four washers (6) on each of the
stabilizers (2 & 3).
2. Mount the left and right decorative covers (70L & 70R)
to the main frame (1) with two screws (73) and one
screw (72) on each side.
