BODYMAX CVEB2419, Руководство по сборке и эксплуатации

Страница: 8 / 24

CVEB2419 B1 Racer Indoor Cycle
8
3
ASSEMBLY
3.1 Package contents
Note:
Before you start assembling the indoor cycle, please make sure that none of the components are
missing or damaged. Use the provided parts list and the exploded drawing as your reference. In such
a case, please contact your contract partner.
3.2 Assembly instructions
Before starting assembly, look carefully through the individual assembly steps shown and assemble
the equipment in the order indicated.
FIG.1:
Attach the front stabilizer (15) to the main frame (16)
with two flat Washers (5), two domed nuts (6) and two
carriage bolts (3).
Attach the rear stabilizer (4) to the main frame (16)
with two flat washers (5), two domed nuts (6) and two
carriage bolts (3).
FIG.2:
Slide the seat post (12) into the vertical seat post (10),
align the holes and fix it in place with the locking knob
(25) and one flat washer (26) at the desired position.
Now fix the seat (13) to the seat post (12) with three
flat washers (5) and three nylon nuts (31).
Insert the vertical seat post (10) into the main frame
(16) and line up the holes. Secure the saddle in the
desired position with the adjustment knob (7).
Note:
The height of the seat can be adjusted after the cycle
is fully assembled.
Connect the wires (29 & 83) with one another. Then
install the handlebar post (17) on the main frame (16)
with four arc washers (21) and four bolts (20).
:
Fig. 1
Fig. 2