STEP 2 Frame Connecting Assembly
5
0
1/4
1/2
3/4
1/4
1/2
3/4
1/4
1/2
3/4
1/4
1/2
3/4
1"
2"
3"
4"
1/4
1/2
3/4
1/4
1/2
3/4
5"
6"
(inch)
1 Please align the two Upright frame to ensure the Lat Pull Bar (8) easier to attach to top
end of the Left and Right Upright, using two 1/2 " spring Washers (27) and two 1/2" Cap
Nuts (30) each side .
2. Attach the Connector Frame (5) to both Right Upright (2R) and Left Upright (2L) using
two 1/2" spring Washers (27) and two 1/2" X 4 1/4" Bolts (20) for top holes that screw
welded inside the Connector Frame (5).
Also using four Spring Washers (27) and two 1/2" X 4 1/4" Bolts for the lower holes .
3. Attach Ball Holder (6) to the two Uprights (2L, 2R), using two 1/2" spring Washers ( 27)
and two 1/2" Cap Nuts (30).
Attach Low ball holder (7) to the Ball Holder (6), using four
1/4" X 1-1/2" SUNKEN HEAD
SCREW(24),
four 1/4" spring Washers (25) and four 1/4" nylon Nuts (33).
Now, please check Base frame (1) and Upright (2R, 2L) align up properly and tighten all
Bolts from bottom gradually .
7
8
5
21
20
27
27
30 27
21
20
27
20
27
27
20 27
27
6
24
27 30
24
27
25
2R
33
25
33
27
27
30
30
25
33
30
2L
