manualshive.com logo in svg

BodyCraft PFT, Инструкция по эксплуатации

Поделиться
Скачать
BodyCraft PFT Скачать руководство пользователя страница 8

7

STEP 3   CABLE ROUTE CHECK

Make certain the Screws (55) is inserted completely through both 

holes in the Revolving Cable Bracket (11).  Failure to do so will result 

in improper alignment and the pulley will rub on steel.

Assemble cable and pulleys simultaneously.

1. While simultaneously inserting the Steel Head End of one Cable (31), attach one 

114mm Pulley (32), and one 90mm Pulley (33) to the Revolving Cable Bracket (11) 

using one 3/8" X 30.5mm Flat Set Screw (55) and one M6 X 12L Male Set Screw (56) 

for each as shown in fig T1.  Pull the cable tight so that the ball end rests against the 

outside of these pulleys.

2. Route the Steel Head End of the Cable (31) up and around the 90mm Pulley (33) 

mounted [using one 3/8" X 50.5mm Flat Set Screw (54), two 3/8" Bushings (40) and 

one M6 X 12L Male Set Screw (56)] to the top frame of Main Upright as shown in fig 

T2.  Continue routing the Cable (31) through the top frame, exiting at the slot for 

pulley T3.  Mount one 90mm Pulley (33) using one 3/8" X 2" Hex Bolt (49), two 3/8" 

Washers (61), one Pulley Guide Bracket (13) and one 3/8" Nylon Nut (64) as shown 

in fig T3.

3. Route the Cable (31) down and around the 114mm Pulley (32) mounted to the Pulley 

Block (12) on the Top Plate (18) using one 3/8" X 2" Hex Bolt (49), one Cap (14), two 

3/8" Washers (61) and one 3/8" Nylon Nut (64) as shown in fig T4.

4. Continue routing up and over two 90mm Pulleys (33) mounted to top bracket in Main 

Upright using one 3/8" X 2" Hex Bolt (49), two 3/8" Washers (61), one Pulley Guide 

Bracket (13) and one 3/8" Nylon Nut (64) for each as shown in fig T5 & T6.

5. Continue routing Cable (31) down through the inside of the front tube to the 90mm 

Pulley (33) mounted to the bottom of the Main Upright using one 3/8" X 30.5mm Flat 

Set Screw (55) and one M6 X 12L Male Set Screw (56) as shown in fig T7.  Attach the 

steel head end of the Cable (31) to the Cable Height Adjuster Assembly (10) using 

one Steel Shaft (41) and two M6 X 12L Male Set Screws (56) as shown in fig T8.

6. Repeat the procedure for the opposite side.

Содержание PFT

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды