201
206
206
237
236
237
236
239
224
235
228
211
228
236
208
210
239
224
235
204
229
210
215
214
225
236
234
211
239
235
224
225
226
236
239
209
210
203
210
235
224
234
227
227 236 205
236
223
235
222
STEP 2 ASSEMBLE BASE FRAME
5
1.Attach the Base Frame (201) to the Connecting Rear Stabilizer (202) using two 1/2"
X 5" Hex Bolts (223) and two 1/2" Washers (235).
2. Insert the 1" Axle (shorter) (209) into the Leg Press Support (203) at the underside
of the bend, and a Ring Spacer (210) on each end of the axle. Then attach to the
end of Base Frame (201) using two 1/2" X 1" Hex Threaded Bolts (224), and two
1/2" Washers (235). Tighten these bolts and cap with two Dome End Caps (239).
3. Insert the 1" Axle (longer) (208) into the top hole of the Leg Press Support (203).
Then attach the Foot Plate (204) using two 1/2" X 1" Hex Threaded Bolts (224), and
two 1/2" Washers (235). Tighten these bolts and cap with two Dome End Caps
(239).
4. Attach Seat Handles (206) to the Base Frame (201), using two 3/8" X 3-1/4" Hex
Bolts (225), four 3/8" Washers (236), and two 3/8" Nylon Nuts (237). Tighten these
bolts.
5. Attach Seat Pad (215) into the Base Frame (201), using two 3/8" X 2-3/4" Hex
Threaded Bolts (226) and two 3/8" Washers (236).
6. Attach Back Pad (214) into the Back Pad Adjuster (205), using two 3/8" X 1" Hex
Threaded Bolts (227) and two 3/8" Washers (236). Then slide the Back Pad
Adjuster (205) to the Base Frame (201) and lock at your desired position using the
Spring Knob (222).
