BodyCraft LT100 spacewalker, Руководство пользователя

Страница: 10 / 25

10
Please read the following console operational instructions thoroughly. Getting familiar with the
console layout and safety key before use is highly recommended.
Practice using this console before you start to get a better understanding of the functions. The
following pages are detailed operational and fold out instructions.
To power up the treadmill, locate the power cord attached to the front of the treadmill and plug it into
a Dedicated 120V/15A for home use with a grounded wall outlet. Turn on the power switch to wake
up the treadmill and go into the idle mode.
Always turn off the treadmill when not in use.
OPERATIONAL INSTRUCTIONS
Your treadmill will not start unless the safety key is placed on the proper location of treadmill console.
Attach the safety key clip properly onto your clothes before operating treadmill. In case of an
emergency, pull the safety key off the treadmill, it will cut off the power to the console and stop the
treadmill immediately. Place the safety key back in place, and the treadmill will resume back to idle
mode. Contact your dealer for a safety key replacement if you do not have one.
SAFETY KEY CLIP & TETHER
The Safety Key (36) is designed to cut the power off for emergency.
In an emergency, disengage the Safety Key (36) from the console
to stop the treadmill.
A. This treadmill will not start unless the Safety Key (36) is inserted
into position A .
B. Always attach the Safety Key (36) securely to your clothing when
using the treadmill.
C. After workout, pull off the Safety Key (36) and keep it well when
you do not use the machine.
NOTE: To prevent unauthorized use, remove the Safety Key (36)
after the workout and store it in a safe place. The treadmill cannot
operate unless the
Safety Key is attached to the console.
A reset button, near the power switch, resets the treadmill’s
circuit breaker. If the running belt stops unexpectedly and all
display console function cease, the circuit breaker may has
been tripped.
To reset the item, take the following steps:
A. Turn off the
Main Power Switch to turn the treadmill Off.
B. If necessary, move the treadmill to an appropriate place.
C. Wait a few minutes. Make sure the safety key is properly
positioned on the console.
C. Push the reset breaker button, and then turn the treadmill On.
D. If the console remains blank, call customer support.
SAFETY KEY OPERATION INSTRUCTIONS
RESET BUTTON