CONNECT CABLE (421)
Steel Ball end
Threaded Bolt End
4
INSTALL CONNECT CABLE
C1
C3
C2
C1
C3
C2
426
436
A3
405
434
419
1. Hook the steel ball end of the
CONNECT CABLE (421)
to the receptor C1 welded to the
BASE FRAME (1)
. Route the cable up and over
Pulley C2
mounted to the bottom of the
DOUBLE PULLEY BLOCK (436)
using one
3/8" X 1-3/4" HEX BOLT (426)
and one
3/8"
NYLON NUT (434)
.
2. Screw the threaded end of the cable half way into the threaded receptor on the
ADJ.
FLOATING PULLEY BLOCK (405)
. The threaded end of the cable is an adjustment
point but should always have at least one third of the threads screwed into the
ADJ.
FLOATING PULLEY BLOCK (405)
.
