BodyCraft ECT500g, Руководство пользователя

Страница: 9 / 32

Assembly
6
7. APPLY LUBRICANT
Refer to FIG. 7
7.1 1 Apply lubricant onto both horizontal axles of the MAST
[A02] and both axles of the CRANK [A11]. Re
NOTE: Use of Gloves, a Brush or a Paper Towel is
recommended.
8. ARM BASE INSTALLATION
Refer to FIG. 8
8. 1 Insert ARM BASE R [A04] onto the
horizontal axle of MAST [A02] and secure with 1
M8 bolt [B32] and 1 5/16" Washer [B33].
[Tighten screws with the Hex
Tool/Screwdriver]
Refer to FIG. 8.2a and Fig. 8.2b
8. 2 Install the ROLLER TUBE [A08] onto the axle of CRANK [A11], see Fig. 8.2a. Place the
ROLLER [C20] onto the ALUMINUM PLATE [F01] of GUIDE RAIL [A12], see Fig. 8.2b. Secure
the ROLLER TUBE [A08] in position with 1 M8 bolt [B32] and 1 5/16" Washer [B33] then install
1 NUT CAP [C11].
[Tighten screws with the Hex Tool/Screwdriver]
FIG. 7
A02
A11
A11
A02
Lubricant
A08
A11
B33
B32
C11
FIG. 8.2a FIG. 8.2b
A12
F01
C20
B32
FIG. 8
A02
A04
B33