17
Step 4:
Assembly of the Weight Bar
1. Attach the weight bar (19) to the vertical bearing housings (20) with a total of eight 3/8”x1-1/4”
hex bolts (45), 16 3/8” washers (51) and eight 3/8” nylon nuts (55).
2. Attach one spring clip (33) to each end of the weight bar (19).
3. Attach the top bearing housing connector (5) to the left and right top bearing housings (17L &
18R) with a total of four 1/2”x3-1/4” hex bolts (40), eight 1/2” washers (50) and four 1/2” nylon
nuts (54).
4. Tighten all bolts, starting at the base and continuing towards the top.
L
NOTICE
In case the horizontal movement is not smooth, loosen and re-tighten the allen bolts on the
bearing housings.
Содержание 3D Smith Rack The Jones
