Customer Service 1-888-707-1880
13 Maurice Pincoffs Canada Inc.
©
2009
COMPUTER OPERATION
STEP 1:
POWER ON
Pedaling or press any button.
STEP 2:
SELECT PROGRAM
Press the
“▲
/
▼”
buttons until the desired program is displayed.
STEP 3:
SET THE PROGRAM TIME (AND INPUT AGE FOR HEART RATE
CONTROL PROGRAMS)
Press the
SET
button, the
TIME
function mode will appear with the display
flashing
“
0:00
”
.
Press the SET button again to pass setting the program
time. Or use the
“▲
/
▼”
buttons to set the program time, from 5 minutes up
to 99 minutes with 1 minute increments. Press the SET button to confirm the
setting. Press the
START/STOP
button to start the program.
When you select the Heart Rate Control Programs, P11 to P12, you must
input your age. Press the SET button until the
AGE/TARGET H.R.
display is
flashing and uses the
“▲
/
▼”
buttons to input your age. Press the SET
button to confirm the setting. Press the
START / STOP
button to start the
program.
NOTE
:
1.
The program will not start until you press the START / STOP button
2.
If you don
’
t set the program time, the computer will count up from one
second up to 99:59 Minutes, and use the default workout time, 30
minutes, to cycle run the program profile.
3.
The computer will count down from the program time that you set.
When the timer counts down to zero, the computer will alert you with
an audible alarm that your workout is complete. You can press any
button to stop the audible alarm.
OPERATION DESCRIPTIONS
1. To stop a running program, press the
START / STOP
button. In this mode, you can
press the
START / STOP
button again to continue to run the current program. Or, you
can use the
“▲
/
▼”
buttons to select a new program. The function values of
DISTANCE
and
CALORIE
will continue to accumulate.
2. When you complete a program, press the
START / STOP
button to stop the program.
You can use the
“▲
/
▼”
buttons to select a new program. The function values of
DISTANCE
and
CALORIE
will continue to accumulate. This will allow you to run
several programs and still know the total
DISTANCE
and
CALORIE
during the
workout.
3. If you want to restart with a new program, press the
RESET
button to reset all of the
function values to zero. Use the
“▲
/
▼”
buttons to select a new program.
4. The computer will shut off automatically after 4 minutes of inactivity, and the function
values,
DISTANCE
and
CALORIE
, will be kept.
POWER SOURCE:
The computer uses the
ADAPTER (88)
as a power source. Use the
BODY BREAK
ELLIPTICAL
with the adapter plugged into an electrical outlet.
PDF created with pdfFactory trial version
www.softwarelabs.com
