BodyBreak 16117107 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 24

BodyBreak 16117107 Скачать руководство пользователя страница 12

Customer Service 1-888-707-1880 Maurice Pincoffs Canada Inc.© 2010

12

LCD DISPLAY INSTRUCTIONS

PROGRAM:

Displays programs for selection during setup, from P1 to P10.

Displays the selected program during exercise.

TIME:

Displays the time. Counts upward from one second to 99:59 minutes.

Counts down from preset value.

SPEED:

Displays the current speed from zero 99.9 miles per hour.

DISTANCE:

Displays the distance from zero to 999.9 miles.

CALORIE:

Displays the calorie consumption from zero to 999.9 Kcal.

NOTE:

The calories readouts is an estimate for an average user. It should be

Used only as a comparison between workouts on this unit.

HEART RATE:

Displays heart rate in beats per minute from 40 to 240 beats per minute.

To display the heart rate, you must grasp the Pulse sensors on both sides of the
handrail, one in each hand. The heart symbol “♥” will begin flashing when the
computer senses your hear rate. Your heart rate will be displayed approximately
five (5) seconds after the heart icon is displayed. If you do not place your hands
correctly and 60 seconds passes without a heart rate reading, the computer will
turn off the heart rate circuit. If this occurs, press the

START

button to restart the

heart rate circuit, place your hands back on the Pulse Sensors correctly, and the
heart rate readout will appear.

PROGRAM DESCRIPTIONS

his computer contains 10 different programs. You can preset the program time and the computer will
divide the time chosen into 10 intervals. If you do not set the programs time in advance, the
computer will default to a 30 minute workout time.

MANUAL PROGRAM:

P1 is a manual program allowing the user to full manual control of the
workload. Use the

“▲” button to increase load. Use the “▼” button to

decrease the load.

«
...
10
11
12
13
14
...
»

Содержание 16117107

























Отзывы:

Нет отзывов