Body Solid Powerline PSC-43X, Руководство пользователя

Страница: 16 / 20

PSC-43X
STEP 3
BE CAREFUL TO ASSEMBLE ALL COMPONENTS
IN THE SEQUENCE THAT THEY ARE PRESENTED.
NOTE:
finger tighten all hardware in this step. DO NOT wrench tighten
until the last step. some components may be pre-assembled.
nylon lock nuts will not fully screw onto bolts, must wrench tighten.
3A. insert end cap into bottom opening and slide nylon
bushing onto top opening of ring pin frame (D) using:
1 - (#12) 2”X2” end cap
1 - (#16) 50X45mm nylon bushing
3B. attach ring pin frame (D) to support frame (A) using:
1 - (#2) M12X80mm hex head bolt
1 - (#6) M12 nylon lock nut
3C. insert end caps into both ends of roller adjuster (E)
using:
2 - (#13) 1 3/4”X1 3/4” end cap
3D. slide roller adjuster (E) into ring pin frame (D) and
secure using:
1 - (#19) quick release ring pin
3E. slide roller rod (K) into opening of ring pin frame (D)
and insert a foam roller and round end cap onto each
side of roller rod (K) using:
2 - (#21) 3 1/2” dia.X8” foam roller
2 - (#15) 1” dia. round end cap
16