background image

DO NOT REMOVE WARNING LABELS FROM
 

 

 MANUAL OR MACHINE

2

WARNING

Safety and Maintenance

of Cables

IMPORTANT:

Cables are

wear items. It is your
responsibility to prevent
unexpected breakage.

Cable inspection should
be performed daily.

Inspect all cables, the
nylon coating on all
cables, and the area
near the fitting at each
end of each cable.

Replace any damaged or
worn cable immediately.

Do not allow the machine
to be used until damaged
or worn cables are
replaced. Using or allowing
a machine to be used
with a suspect cable can
result in serious injury. See
Owner’s Manual for more
information.

C all 1-800-556-3113

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:

Inspect equipment before each workout. Check that all nuts, bolts, screws and pop pins 
are in place and fully tightened. Also, before use, check cables for sign of wear. Replace all 
worn parts immediately. Never use machine if any parts are damaged or missing.

FA I L U R E   T O   F O L L O W   T H E S E   R U L E S   M AY   R E S U LT   I N   S E R I O U S   I N J U RY.

Keep clear of the cables and all moving parts when machine is in use.
Always make sure all Snap Links are closed when doing cable/pulley/strap exercises.
Exercise with care. Perform your exercises at a smooth moderate pace; never perform jerky 
or uncoordinated movements that may cause injury.
It is recommended that you workout with a training partner.
Do not allow children or minors to play on or around this equipment.
If unsure of proper use of equipment, call your local Body-Solid distributor or the 
Body-Solid customer service center at 1-800-556-3113.

WARNING:

 Consult your physician before starting your exercise program. For your own 

safety, do not begin any exercise program without proper instruction.

Содержание POWERLINE PAB-21 X



















Отзывы: