Body Solid GPA-3, Руководство пользователя

Страница: 6 / 14

6
S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Some components may be pre-installed.
A. Connect Pulley Plate (B) and Center Arm Frame (A) as shown by using:
Two A1 (M12x75 hex head bolt)
Two B1 (M12 nylon nut)
B. Install two Pulleys (D4) to Center Arm Frame (A) using:
Two A3 (M10x45 hex head bolt)
Two B2 (M10 nylon nut)
C. Slide Plastic Cover (D2) onto Center Arm Frame (A).
Insert both End Caps (D5) into Center Arm Frame (A).
D. Slide Foam Rollers (D1) onto Left Arm (C) and Right Arm (D).
Insert both End Caps (D5) into Left Arm (C) and both End Caps (D5) into Right Arm (D)
as shown.
E. Affix Pulley Holder (E) by using:
Two A2 (M12x70 hex head bolt)
Two B1 (M12 nylon nut)
F. Install Pulley (D4) to Pulley Holder (E) using:
One A4 (M10x40 hex head bolt)
One B2 (M10 nylon nut)
G. Insert End Caps (D6) into Pulley Holder (E) as shown.
(pre-installed)
H. Insert Left Arm (C) and Right Arm (D) onto the shafts on Center Arm Frame (A) as
shown and secure using:
Two A6 (M10x16 hex head bolt)
(pre-installed)
Two C3 (M10 washer)
(pre-installed)
I. Connect Pad (G) by using:
Two A5 (5/16” x 2 3/4” hex head bolt)
Two C2 (5/16” spring washer)
Two C1 (5/16” washer)
J. Insert Pulley (D4) into Pulley Holder with Hook (F) and secure using:
One A4 (M10x40 hex head bolt)
One B2 (M10 nylon nut)
NOTE:
Pulley Holder with Hook (F) will be completely assembled in
the next step.