6
7
Assembly Instructions
To enable the knee pads to twist whilst
exercising, remove the long locking
pin
5
from the centre of the knee pad shuttle.
Secure the display in place using the screw
in the front of the display.
Connect the wire from the display to the
wire on the machine.
Place handle bar
3
on top of main frame
1
, making sure the two holes align with the
holes on the top of the main frame
1
. Using
the two screws with washers from the bag.
Secure the handle bars
3
into position with
allen key
B
.
Display Functions
4
5
6.
7.
Press the red button to turn it on, leave for a few moments and it will turn itself off.
Press the red button to cycle through functions.
To reset the display, press and hold the red button.
The display requires one button cell battery (SR44) provided.
Remove battery if not be used for long periods of time.
STRIDES/MIN
This shows you an average of how many strides
you are doing in one minute.
SCAN
This will flick between each of the different
functions on the display.
COUNT
Shows the total strides performed.
TIME
Shows you how long you have been exercising.
CAL
Shows you how many calories you have burned.
To remove the battery disconnect the display by unscrewing and unplugging the wire connectors.
Locate the battery housing on the reverse, bend the support arm and slide the battery out.
