Body Flex Sports Body Rider BRT3880, Руководство пользователя

Страница: 12 / 28

#32. Screw (M5x12 mm)
[4 Pieces]
OMPUTER ASSEMBLY
Remove the four
Screws (#32) that are pre-assembled
on the Computer (#49) . Set them aside nearby as they
will be used later in this process.
With the help of an assistant, connect the
Main Sensor
Wire (Upper) (#51) to the corresponding wire on the
Computer (#49)(diagram A) . Connect the end of wire
of Handle Pulse (#50) to the Computer (#49) by
inserting it into the back hole as illustrated below
(diagram B).
Being careful not to pinch/damage any of the wires,
attach the
Computer (#49) to the bracket on the Center
Post (#02) by using the four Screws (#32) that were
previously removed.
A
B
A s s e m b l y S t e p 6 Hardware Required
BOLTS
Assembly Instructions
Page 11 BRT 3980/3880