8
Using Your SensaTONE for PFS
PFS - Pelvic Floor Stimulation
a) Switch the unit on by pressing the Power Key
button. The SensaTONE will always start up in
Mode A.
b) The SensaTONE has four preset programmes:
Mode A
- Urge Incontinence
Mode B
- Stress Incontinence
Mode C
- Mixed Incontinence
Mode D
- After Care
c) Select the mode most appropriate for your type
of incontinence by pressing the ‘MODE’ key.
Please refer to page 9 if you are unsure of which
mode to use.
d) Now begin by pressing the ‘intensity up’ key.
Each time you press this key, you will see the
intensity level increase on the LCD.
e) Gradually increase the ‘intensity up’ key until you
comfortably feel your muscles contracting. If the
sensation feels too strong, simply press the
‘intensity down’ key minimise the feeling.
f ) Modes A, B and C all have fixed programme
times. The SensaTONE will automatically switch
off once the programme is complete. Mode D
does not have a fixed programme time. Refer to
page 9 for more information about Mode D.
g) After use, always remember to ensure that the
SensaTONE is switched off. Remove the
SensaTONE probe from your body, disconnect
the leads and then clean it in accordance with the
above instructions found on page 6 or in the
SensaTONE probe instruction manual.
The SensaTONE should NOT be used:
• During pregnancy
• During the menstrual period
• If you suffer a urinary or vaginal infection
• At the same time as a barrier contraceptive
device such as a diaphragm or cervical cap
Before first use of the SensaTONE, please
familiarise yourself with the ‘Precautions and
Contraindications’ contained on page 4.
Bodyclock Sensatone Inst 3.qx8_Bodyclock Sensatone Instr 14/07/2010 11:26 Page 8
