Body Clock iTENS, Руководство пользователя

Страница: 8 / 24

8
Setting Up Your Unit
1. Remove the iTENS device from electrode wing and snap
it into the charging station ensuring that the contacts
align on each.
2. Charge the device for 2.5 hours before use by plugging
the charging cable into the charging station and a
powered USB socket (either via a computer or other
suitable device). The iTENS device will flash whilst
charging.
3. The iTENS device will stop flashing once charged.
Remove it from the charging station and connect it back
to the electrode wing by snapping it into the holder.
4. Now apply the gel pads to the electrode wing by
peeling off one side of the gel pad film and applying
the gel pads to the silver space defined on the back
side of the wing.
Leave the remaining piece of film
on each gel pad until the device is ready to use (see
diagram below).
5. Install and open the iTENS App on your smartphone or
tablet.
The iTENS App is available from the Apple App
Store and Google Play Store under the name “iTENS”.
6. Once the App is installed, you are ready to use your
iTENS device.
Press and hold the center button on the iTENS device
for 3 seconds (see diagram on page 7). This will
initiate the connection between your iTENS device
and the App. This is also known as ‘Pairing’.
The LED light will begin flashing on the iTENS device
which means that the connection mode is active.
Remove pads from the pouch
and peel away one side of
protective film from the gel.
Place exposed gel face down onto
the silver underside of the wing so it
is aligned and flush with the wing.