ASSEMBLY
Step 1
Assembly Rear Stabilizer
1. Use the Carriage Bolt M8 (No.11) to
attach rear Stabilizer (No.12) to the
frame.
Step 2
Assembly Meter and Handle Grip
1. Meter Assembly: Insert two AAA
batteries in to the back of the display
panel. Attach the meter, (No.23) to the
meter stand using the screws. Plug the
meter cord into the back of the display
panel.
2.
Handle Grip Assembly: Insert Crank
(No.27) and Handle Grip (No.30) to
crank fixed holder for Left/Right side.
3.
Loosen and Pull triangle knob to
adjust the length of crank.
Load Adjustment
To increase the load, turn the Tension
Knob (No.24) clockwise. To decrease the
load, turn the Tension Knob (No.24)
counterclockwise. There are eight levels
for the load adjustment.
Note:
The brake system of this Arm Ergo
is adjustable.
4