PT620 / VKR1808
Page 6
Assembly STEP 2
With the help of an assistant, align and attach the Upright
(#05)
to the Base Frame (Right)
(#02)
. Insert two Carriage
Bolts
(#16)
through the Base Frame (Right)
(#02)
and
Upright
(#05)
. Secure them together using two Washers
(#17)
and two Lock Nuts
(#18)
. Repeat this process on the
other side.
Align and attach the Upright Angle Support Frame
(#04)
to
the Upright
(#05)
and Base Frame (Right)
(#02)
. Insert two
Carriage Bolts
(#16)
through the bottom of the Base Frame
(Right)
(#02)
followed by the Upright Angle Support Frame
(#04)
.
At this point hand tighten the two Washers
(#17)
and two
Lock Nuts
(#18)
on the lower portion as it may be difficult to
align the holes for the upper portion. Insert two Bolts
(#19)
through two Curved Washers
(#20)
followed by the Upright
(#05)
, and Upright Angle Support Frame
(#04)
. Secure them
together using one Curved Washer
(#20)
and one Lock Nut
(#15)
. Repeat this process on the other side.
Now secure the Lock Nuts
(#18)
that were hand tightened in
the lower portion. Repeat this process on the other side.
Hardware Required
#16. Carriage Bolt (M10x65 mm) [8 pieces]
#19. Bolt (M8x70 mm) [4 pieces]
#17. Washer (M10)
[8 pieces]
#20. Curved Washer (M8)
[6 pieces]
#15. Lock Nut (M8)
[14 pieces]
#18. Lock Nut (M10)
[8 pieces]
