Body Champ BR2117, Руководство пользователя

Страница: 12 / 24

BR2117 BR3151 Page 10
Assembly STEP 4
Hardware Required
COUPLER BAR ASSEMBLY (PART I)
Referring to the diagram below, the two Spacers (#43) ,
Wavy Washers (#37) , Washer (#31) , Washer (#34) , Hex Bolt (#23)
are pre-assembled on the two bars that are protruding from the
Center Post (#02) . You will need to sequence them as detailed below.
On the left side of the Axle, please assemble the parts in the following
order: one Spacer (#43) , one Wavy Washer (#37) , Left Coupler Bar
(#04) , one Washer (#31) , one Washer (#34) ,and secure using one
Hex Bolt (#23) . Place one Bolt Cap (#27) on top of Hex Bolt (#23)
and secure in place.
PEDAL TUBE ASSEMBLY
Attach the Left Pedal Tube (#03L) onto the left Crank (#10) as
illustrated and secure by inserting from the outer edge of the Left
Pedal Tube (#03L) : one Left Pedal Hinge Bolt (#18L) and one Wavy
Washer (#32) . Secure from the inner edge (behind the Crank (#10) )
with one Spring Washer (#30) and one Left Nylon Nut (#40) .
*** PLEASE DO NOT tighten the hardware until PART II on next page
has been completed. This will allow you to align the holes for proper
and smooth assembly.***
Repeat this process on the other side using the Right Pedal Tube
(#03R) .
#18L. Left Pedal Hinge Bolt (1/2"x97 mm)
[1 Piece]
#18R. Left Pedal Hinge Bolt (1/2"x97 mm)
[1 Piece]
#27. Bolt Cap (S14)
[2 Pieces]
#40. Left Nylon Nut
with BLACK inner nylon ring
[1 Piece]
#41. Right Nylon Nut
with WHITE inner nylon ring
[1 Piece]
#34. Washer
(M8, φ26 mm)
[2 PIeces]
#37. Wavy Washer
(φ19 mm)
[2 Pieces]
#30. Spring Washer (1/2")
[2 Pieces]
#31. Washer (M8)
[2 Pieces]
#32 Wavy Washer
(1/2") [2 Pieces]
#23. Hex Bolt (M8x15 mm)
[2 Pieces]