SADDLE
PEDALS
A
SSEMBL
Y
ONLY RELAVENT IF THE SADDLE IS NOT ALREADY
INSTALLED.
1) Place the saddle in the track on the seat post.
2) Secure the saddle with the remaining adjustment
handle, see figure 7.
To fasten the saddle to the adaptor and adjust the tilt
of the saddle, use a 14 mm wrench on the bolt marked
with an A on figure 7.
1) Place the right pedal arm with the socket
pointing upwards, see figure 8 .
2) Put maximum resistance on the brake, so the
pedalarm is unable to rotate, see figure 9
PLEASE NOTE
The pedals are marked with R for Right and L
for Left side.
The pedals should always be screwed on in
the direction of the handlebar, see figure 10
and 11.
Make sure that the hole in the pedal arm is
greased when mounting the pedal.
Start mounting the pedal by hand as tools will
tighten the pedal at a wrong angle.
3) After tightening by hand, use a 15mm pedal
wrench to tighten the pedal completely (45Nm).
WASHER
Figure 7
A
!
011