MAINTENANCE
BODY
BIKE
®
I N DOOR C YC L E
2: Release tension completely on the brake.
3: Remove the two screws holding the brake block
to the frame by using an 8 mm wrench, see fi gure 15
4: Take the new brake block and fasten it to the
frame by tightening the screw closest to the brake
block. Then place the block in the correct position
under the brake (see fi gure 16).
5: Fasten the remaining screw furthest away from
the block, and then make sure that both screws are
tightened properly, see fi gure 17.
6. Grease should be applied to the cavity on top of
the brake block or to the top nut on the brake to
ensure a smooth interaction between the two.
7: Remount both service hatches.
Figure 17
Figure 16
REMOVE
Figure 15
15
