TIMER
FUNCTIONS
9
TIMER
FUNCTIONS
8
TIMER FUNCTIONS
No times are set
and no automatic
functions are
active when the
unit is plugged in-
to the mains. The
following sections
describe in detail
how the times and
functions can be
set.
The unit star ts
automatically
in time-setting
mode and the
display flashes.
Plug the unit
into the mains.
Turn on the unit
by pressing the
ON-OFF button.
The unit can be
switched on or off
at any time with
the ON/OFF button.
Cof fee can also
be brewed without
the time being pro-
grammed.
Time-setting mode:
If you set the time
for the first time,
the time display
and the clock sym-
bol will flash.
If you change the
set time, the clock
symbol will flash.
If you do not press
any button for 5
seconds, the set
time is automati-
cally stored.
Changing the time
Setting the time
Programming automatic star t time.
The star t time for automatic
cof fee brewing can be programmed as desired. The unit switches
on automatically at the desired (programmed) time, the brewing
process is star ted and cof fee is prepared. The selected star t
time is automatically activated after programming.
Switch on the
unit and press
the AUTO-ON
button for 5
seconds.
Input the
desired hour for
the automatic
star t time.
Input the min-
utes for the
automatic star t
time.
If you do not
press any button
for 5 seconds,
the set time is
automatically
stored.
Activate automatic star t time.
The unit switches on at the desired
time and cof fee is prepared automatically. The AUTO lamp goes out,
the display ON appears, and the ON lamp is lit.
Once cof fee has been prepared, the unit remains switched on for 2
hours. However, it can also be immediately switched of f by hand.
If cof fee is to be automatically prepared again the following day, the
automatic star t time must be reactivated.
Cof fee can always be brewed even if the automatic star t time is
activated.
AUTO time-setting
mode:
If you set the
AUTO star t time,
the AUTO lamp
and the AUTO sym-
bol will flash.
If you do not press
any button for 5
seconds, the set
time is automati-
cally stored.
Input the pres-
ent time in
hours and min-
utes.
If you do not
press any button
for 5 seconds, the
set time is auto-
matically stored.
Press one of
the right-hand
buttons for 2
seconds.
Change hours
and minutes.
Wait until the
clock symbol
stops flashing.
Press the AUTO-
ON button for 2
seconds.
The display
AUTO appears
and the AUTO
lamp is lit.
