User Manual for BCL-X Series Laser Machine
62
3mm
10-26
40-70
40-60
6mm
6-15
40-70
40-60
8mm
5-12
40-63
40-58
10mm
4--10
45-75
40-75
12mm
3--8
50--75
45-75
1mm lower than focal block
15mm
2---5
55-75
55-75
1.5mm lower than focal block
18mm
0.8--1.5
55-75
55-75
1.8mm lower than focal block
20mm
0.5--1.2
58-75
58-75
2mm lower than focal block
30mm
0.3--0.8
58---85
58-85
2.5mm lower than focal block
Attention: above parameters are only for reference, not actual working parameters.
Postscript
Bodor reserves the right to explain the terms of the manual. We will try our best to
guarantee the accuracy. Due to the limitations of editors, there may be improper mistakes
or omissions. And we don’t undertake any responsibility for these. We are not responsible
for any direct, indirect, special, additional or relevant damage or liability caused by
improper use of the manual or the machine. We hope readers can give suggestions and
criticism.
Copyright is owned by Bodor. Without permission, none can copy, manufacture, process
and use this product and other related parts directly or indirectly. Without permission,
none can imitate, copy, extract or translate this user manual. People who violates this
requirement will be investigated legal liability.
《
After-sale warranty of Laser Engraving
Cutting Machines
》
First of all, thank you very much for purchasing a Bodor product. In order to
guarantee the smooth processing of after-sales service, we will make the
following announcements:
General principles
1. We are responsible for the maintenance of facilities which are within the
