User Manual for BCL-X Series Laser Machine
53
on the left side of transom. The third one is on the top side of laser head, lens is inside of
lens cone). Laser beam is transmitted through these reflectors and lens. It's easily for
mirrors to smear dust and other dirt, which could result in laser's loss or mirrors' damage.
The first and second reflector needn't have to be taken off when do cleaning. Take lens
wiping paper with leaner to wipe reflectors from center to edge. The third one and lens
need to take off from lens frame and clean them with same way, and put back after
finishing.
Attention:
①
wipe the reflectors and lens softly, do not damage their surface coating
film;
②
handle gently during wiping to avoid falling down;
③
the convexity side must be
arranged downward.
7.5 Guide rail's clean
We suggest to clean the guide rail every half a month when the machine is powering off.
As key parts, guide rail and straight line axis play role of guiding and supporting. In
order to guarantee higher processing precision, higher requirement for guide rail's
guiding accuracy and straight line axis' moving stability. During processing, the material
processed can produce much corrosive dust and smog. After long term acceleration of
these dust and smog on guide rail and straight line axis, equipment's working precision
can be affected and can also form corrosive spot on them, thus shorten machine's lifespan.
For maintaining equipment's normal and stable work, make sure the products' processing
quality, please do well in guide rail and straight line axis' daily maintenance.
Attention:For cleaning guide rail, please prepare dry cotton cloth, lubricating oil(sewing
machine oil can be adopted)
7.6 Light path's examination
Laser engraving equipment's optical system consists of reflectors' reflection and lens'
focusing. In light path, lens doesn't exist excursion, however, the three reflectors are
fixed through machinery, so possibility for excursion can be huge. Generally speaking,
the excursion of light path could seldom happen, we suggest users to test it before
everyday working.
VIII CO2 glass laser tube's precautions for use
8.1
Before using, please connect the water pump/chiller first, adopts lower side-in and
higher side-out principle, adjust water-outlet tube's position, guarantee cooling water is
full of cooling tube. There should be not any bubble inside the laser tube, then power
on.Requirement: cooling water should be soft water(distilled water or pure water). Water
temperature should be frequently examination and should be within 12-30
℃
. It should
not be too low or too high, especially in summer. Once water's temperature is too high,
you should change cooling water in time or stop the equipment for some time. Users in
