5
EN
II
– Installation
2.1 Clock installation
1) Connect the electronic board (see page 6) and the keypad (optional) to the terminal strip on the
back of the clock.
2) Set the brightness by pressing the "S" and "+" keys on the back of the clock (see above).
Brightness may be adjusted when the Style clock is in normal use mode, i.e. in neither the configuration
menu, nor in the set time menu. The default brightness is level 2.
3) Mount the clock in the prepared recess using the 4 wall plugs and 4 screws (see clock dimensions
on page 10).
2.2 Installing the keypad
To install and use the keypad (including in timer mode), refer to the instructions supplied with the
keypad (ref.: 605615 or 607800 depending on the model).
Example of a Style 5S Hospital
Impulse synchronisation electronic board
Connector for wiring
synchronisation via impulse
Configuration keys: S and +
Connecting the keypad
T-
T+
0V
15V
Brown
White
Green
Yellow
+
Hold down for 3 seconds
+
+
+
S
End of menu
Select light intensity:
LUM 1: low intensity
LUM 4: high intensity
