- black display with the “:” that remains constant for 3 seconds.
- dynamic display of received messages.
Upon reception of 3 coherent and consecutive messages or after a minute : end of
test.
10) DISPLAY BRIGHTNESS ADJUSTMENT
- Note : on the “outdoor” models, the light intensity sets itself automatically.
On the “indoor” models,
- the light intensity can be set when the
Style
S clock is in normal operation, i.e. when it is
not in the configuration and set time menu.
- Pressing the “
+
” key a number of times lets you select directly from four different levels
whichever display intensity is best suited to the surrounding lighting conditions.
11) DATA BACK UP
-
Style
clocks are fitted with a device for storing the configuration parameters even in the
event of an extended power failure.
- However the date and time may be “lost” following a lengthy power failure (in excess of 72
hours). In this case, the clock will display “0:00" when the power supply is restored. This
occurs notably when the clock is first brought into service.
- Whenever the clock displays “0 :00" following a power failure, the time needs to be reset
(cf. Chapter 8). However on radio-synchronized clocks connected to an antenna, the time
will be reset automatically.
12) CLEANING
Use an antistatic product of similar type to the one shipped in the original packaging.
Never use alcohol, acetone or any other solvent liable to damage the casing and filter on
your
Style
clock.
11
