Bodart&Gonay ARGOS 47GV74E, Инструкция по эксплуатации и техническому обслуживанию

Страница: 14 / 32

14 Argos
7 MAINTENANCE
- Never clean the glass when it is hot! Wait for it to cool down.
- Dusting: do not use an aggressive product or liquid; a dry cloth or preferably dry foam is recommended.
- Soiled areas can be restored using SPECIAL HIGH TEMPERATURE (Bodart&Gonay) spray paints availa
ble from your supplier.
- For cleaning the glass, do not use an aggressive product. We recommend the “BG CLEAN” product,
available from your supplier.
ANNUAL MAINTENANCE
- The appliance and exhaust fl ue must be checked and cleaned every year by your approved installer.
- Turn off the gas supply stopcock.
- Open the door (take this opportunity to clean it).
- Remove the gravel.
- Remove the dust deposits from inside the heating unit and from the burner using a vacuum
cleaner or brush.
. Check that the connections are airtight and that the diff erent parts of the appliance operate
smoothly.
- The Fan:
- Unplug the electricity supply, disconnect the fan(s) then remove it/them.
- Clean the impeller blades using a brush. (COMPRESSED AIR IS PROHIBITED).
- Reconnect everything.
VENTILATION
- The ventilation must always be switched on.
- Fan speed is adjustable to allow you to adjust ventilation to your requirements.
- The ventilation system is fi tt ed with a thermal switch. This device starts or stops ventilation auto
matically according to the temperature of the heating unit. When the latt er reaches a temperature of
around 40°C, the thermal switch starts up the fan.
8 USING THE APPLIANCE
The fi replace is controlled by means of a remote control and a manual control for both starting and
stopping. Ventilation is managed using a variator.