Böcker TL 1512, Руководство по эксплуатации

Страница: 65 / 115

Steel frame Table form lift TL 1512
213300043 65
Malfunction
,
CODE* Error message Possible cause Troubleshooting: Repair by
NO1
“Floor” safety circuit
a) The Emergency Off
button was activated
b) The Emergency Off
button on one of the
loading point control
system was activated
c) The electrically
monitored enclosure
door is open
d) The blind plug for the
socket is missing
e) The blind plug of the
safety chain is missing
f) The “floor”safety
circuit is interrupted
a) Unlock button
a) Unlock button
c) Close electrically control
enclosure door
d) Plug in the blind plug for the
‘Operation’ socket
e) Plug in the blind plug for the
safety chain
f) Check all connections if
necessary repair broken wire
of trailing cable
a) US
a) US
c) US
c) US
e) US
f) TE
NO2 Excessive load a) Lift capacity
exceeded
b) If using a 2-mast
system, load measuring
unit may be canted
a) Remove payload from lift
b) Vent system manually
a) US
b) LO
NO3 Safety brake
a) Do not reset the
switch of the safety
brake after safety test
b) Safety brake was
triggered during normal
operation
a) Reset safety brake switch
b) Inspect drive
safety brake
a) LO
b) TE