manualshive.com logo in svg

BOCK UL-HGX44e, Руководство по сборке

Поделиться
Скачать
BOCK UL-HGX44e Скачать руководство пользователя страница 4

4

 D
 US
 F
 E

96547-10.2021-Us

1

|

 Safety

Indicates a dangerous situation which, if not avoided, will cause 
immediate fatal or serious injury.

Indicates a dangerous situation which, if not avoided, may cause 
fatal or serious injury.

Indicates a dangerous situation which, if not avoided, may cause 
fairly severe or minor injury.

Indicates a situation which, if not avoided, may cause 
property damage.

Important information or tips on simplifying work.

1.2 

General safety instructions

Risk of accidents.

 

Refrigerating compressors are pressurized machines and as such 
call for heightened caution and care in handling.

 

The maximum permissible overpressure must not be exceeded, 
even for testing purposes!

Risk of burns! 
- Depending on the operating conditions, surface temperatures of      
  over 60°C (140°F) on the discharge side or below 0°C (32°F) on 
the suction side can be reached. 
- Contact with refrigerant must be avoided. 
  Contact with refrigerant can cause severe burns and skin  
  damage.

1.1 

Identification of safety instructions

Содержание UL-HGX44e





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды