Boca EXPRESS 14.4 Скачать руководство пользователя страница 47

46

47

If you suspect a problem with a specific program or
software package, make note of the name, version or release
number, and manufacturer of the software.

2. Call our Technical Support Department between the hours of

8:00 a.m. and 6:30 p.m. EST Monday through Friday at (407)
241-8088. A technician will be available to discuss the
problem(s) you are experiencing.

If factory service is required, you will be given a Return
Merchandise Authorization (RMA) number.  Please place
this number on the outside of the package when you return
the item(s) for service and reference it on any
correspondence included in the package. Boca Research,
Inc. will  return any product which is not accompanied by
an RMA number.

3. Refer to the Warranty Statement if the product is covered

under the five-year Boca Research, Inc. Limited Warranty.

4. Certain parts will not be covered under the Boca Research,

Inc. Limited Warranty. Dealer installed parts are warranted
by the dealer. Parts which you have installed yourself are
covered only by the supplier’s warranties. In these cases,
Boca Research, Inc. can identify which parts are defective, but
will not replace such parts until specific written authorization
is received from you. The cost of parts and labor involved in
making such repairs will be billed to you C.O.D.

5. When sending the modem to Boca Research, Inc. for repairs,

please be sure to include:

Содержание EXPRESS 14.4





















































Отзывы: