Boca BocaNET-24, Руководство по установке

Страница: 17 / 48

17 17
17 17 17
Section Section
Section Section
Section Thr Thr
Thr Thr
Three: Netw ee: Netw
ee: Netw ee: Netw
ee: Networ or
or or
ork Conf k Conf
k Conf k Conf
k Configura igura
igura igura
iguration tion
tion tion
tion
The BocaNET-24 is intended to connect multiple
workstations (stand-alone) and/or other concentrators to an
Ethernet star topology network.
3.1 10B 3.1 10B
3.1 10B 3.1 10B
3.1 10BASE-T POR ASE-T POR
ASE-T POR ASE-T POR
ASE-T PORTS TS
TS TS
TS
The BocaNET-24 has 24 10BASE-T UTP (unshielded twisted
pair) ports to connect to other hubs or workstations. This
connection uses an RJ-45 8-pin connector. When connecting
to workstations, a straight-through connector is used. When
connecting to other hubs, a “crossed” cable is used.
Connections are on the next page. See Section Four: Cabling
Characteristics for pin-outs of cables.
NOTE: If a straight cable is used to connect to NOTE: If a straight cable is used to connect to NOTE: If a straight cable is used to connect to NOTE: If a straight cable is used to connect to NOTE: If a straight cable is used to connect to
another hub, use the switch to internally cross Port 24
another hub, use the switch to internally cross Port 24 another hub, use the switch to internally cross Port 24 another hub, use the switch to internally cross Port 24 another hub, use the switch to internally cross Port 24
the transmit and receive pairs of the cable.
the transmit and receive pairs of the cable.
the transmit and receive pairs of the cable. the transmit and receive pairs of the cable.
the transmit and receive pairs of the cable.
Network Configuration Network Configuration
Network Configuration Network Configuration
Network Configuration
9379.p65 1/28/99, 2:51 PM 17