- 14 -
of this value are recommended.
Preamble
A preamble is a signal used in
wireless environment to
synchronize the transmitting
timing including Synchronization
and Start frame delimiter. (
Note
:
If you want to change the
Preamble type into
Long
or
Short
, please check the setting of
AP.)
Authentication
The authentication type defines
configuration options for the
sharing of wireless networks to
verify identity and access
privileges of roaming wireless
network cards.
You may choose between
Open
System
,
Shared Key
, and
Auto
Switch
.
Open System:
If the Access
Point is using "
Open System
"
authentication, then the wireless
adapter will need to be set to the
same authentication type.
Shared Key
:
Shared Key
is
when both the sender and the
recipient share a secret key.
Auto Switch:
Select
Auto
Switch
for the adapter to select
the Authentication type
automatically depending on the
Access Point Authentication
type.
Retry limits
You can set the number of retries
if no acknowledgement appears
from the receiving station.
Antennas
To set the type of the antenna
Tx Antenna
：
Antenna2 (Use the
factory default)
RX Antenna
：
Both (Use the
factory default)
802.11g version
This section is enabled only with
G-Only Mode
