14
Software Installation and
Programming
Software Installation
This section describes how to install the WEBGLIDER software,
and also how to configure it, once the software is installed. The
following operating systems are covered, in this order: Windows
95 (p. 14), Windows 3.x (p. 18), and Windows NT (p. 18). If you do
not use one of these Operating systems, please see ‘Command Line
Configuration’ in the Reference Guide. Start your operating system
as you normally would, and insert the WEBGLIDER Driver and
Configuration Utility diskette into your diskette drive.
Windows 95
1. Select START, then RUN, then type A:SETUP or B:SETUP, and
select OK.
2. Follow ALL on-screen instructions closely while the files are
copied to your system. A WEBGLIDER program group will be
created on the desktop. You may want to create a shortcut to the
WEBGLIDER configuration program on your desktop. To do so,
put the mouse pointer on the WEBGLIDER Configuration icon
in this group, click your Right Mouse Button, and scroll down to
Create Shortcut, and click this selection with the Left Mouse
Button. Once the shortcut is created, click it with the Left Mouse
Button, and drag it onto your desktop. Remove the diskette
from your diskette drive.
3. Now, make the following command choices in the EXACT order
presented. Select START then SETTINGS then CONTROL
PANEL
. Then double click ADD NEW HARDWARE.