EXPRESS
INSTALLATION FOR
WINDOWS 95 USERS
YOU MUST INSTALL THE
DRIVER DISKETTE
SOFTWARE BEFORE
INSTALLING THE MODEM!
1
DO NOT SELECT ‘NEXT’ YET
• Start Windows 95 and insert driver
diskette.
• Double-click My Computer, Control
Panel, and Add New Hardware.
Click Next, No, Next, Ports, Next,
Have Disk, OK, Next.
• Note Input/Output range (COM
setting) and Interrupt Request
(IRQ):
03F8-03FF=COM1
02F8-02FF=COM2
03E8-03EF=COM3
02E8-02EF=COM4
• Select Next, Finish. Select YES to
restart, or go to Start, Shutdown.
*
• Then power off.
IRQ3
IRQ4
IRQ5
IRQ7
COM1
COM2
COM3
COM4
• Change the jumpers on the modem
(if necessary) to match EXACTLY
the settings recommended by
Windows 95.
2
• Physically remove or disable
existing modem
.
• Power back on
• Install FaxWorks; FaxWorks will test the
connection. Refer to panel 5 in this
foldout as well as the FaxWorks
documentation.
FaxWorks
6
• Remove diskette, power back on, and
start Windows 95
• Double-click My Computer, Control
Panel. Click Add New Hardware. Click
Next, No, Next.
• Select Modem, Next, then Don’t Detect
my modem..., then Next.
• Select Boca Research from
manufacturer list.
• Select the MV.34AI from the list or
FDSP34AI only if you have the
speakerphone model.
• Re-insert the driver diskette when
requested if you chose the FDSP34AI.
Click OK.
• Then click Next, then select the COM
port that was installed in Step 1.
• Select Next, Finish. Hardware
installation is complete.
• Shut down computer before connecting
phone cables.
*
If you view the Device Manager
information before shutting down
and installing the modem,
Windows 95 reports a problem
with the modem port.
4
3
• With power OFF, remove system
cover, choose an open ISA slot,
and gently insert the modem card.
2
• Connect supplied phone cable between
LINE jack and wall jack.
• Connect existing phone cable between
PHONE jack and phone (optional).
• If you have the FDSP34AI, refer to
panel 4 for mic./spkr. connections.
5
