MINI/MICRO?
Defines the type of printer.
MINI
Is for a printer with a Cutter Assembly
(factory default)
MICRO
Is for a printer without a Cutter Assembly
PRINT SPEED?
Controls the speed the ticket travels at. Also effects the print quality.
The numbers range from
0 - FASTEST
to
7 - SLOWEST. 3 is factory default.
DIAGNOSTIC MODE?
Please consult your Programming Guide
Your choices are
YES
or
NO
.
NO is factory default.
TICKET TYPE?
Defines how the optos are configured on the paper guide assembly.
NORMAL
Both optos are inline with each other (usually mounted on a black bracket
)
ATM
Feed opto is mounted under the thermal head and cut opto is attached to the cutter
assembly.
LABEL
Same as ATM but the cut opto is a see through type.
SPECIAL TICKET
This option is for a printer with a ticket load switch.
(factory default)
STATUS ENABLED?
Sets status response protocols.
Here are the following choices:
TRANSPARENT MODE?
Please consult your Programming Guide
Your choices are
YES
(Enabled) or
NO
(Disabled).
YES is factory default.
PAPER MODE?
Is generally used only for test purposes. It may also be used on roll stock with no
black marks on the ticket.
Your choices are
YES
(Enabled) or
NO
(Disabled).
NO is factory default.
HEAD DPI?
Defines thermal head dpi (dots per inch)
Your choices are
200
or
300
.
300 is factory default
.
11
NONE
Disables the XON/XOFF and status response protocols
SERIAL
Enables the XON/XOFF and status response protocol for the serial port (factory default)
PARALLEL
Enables bi-directional parallel statusresponses if printer is configured as bi-directional.
SER/PAR
Enablesb both bi-directional parallel and serial status responses
USB
Enables USB status responses
USB/SER
Enables USB and serial status responses
USB/PAR
Enables USB and bi-directional parallel
USB/SER/PAR
Enables USB, bi-directional parallel and serial status responses
