Bob's Space Racers DOG POUNDER AIR, Руководство по эксплуатации

Страница: 34 / 95

BOB’S SPACE RACERS® DOG POUNDER
™
GROUP GAME MANUAL
22
COMPUTER CONTROLLED GAME OPTIONS
In all 2400 Electronics ALL game features and controls can be set and changed using the keyed BSR MULTI-LINE
LCD display panel. The option registers settings are based on years of testing and operating experience and preset
by Bob's Space Racers
®
technicians. These settings can be changed by the end user depending on your
operational needs. (See Option Register Setting Instructions beginning on the next page.) If you have any
questions about these settings please contact our Technical Services department.
SIMPLE SOLUTIONS
Look for the simple things first, 90% of problems that occur with BSR equipment are simple things that are
overlooked.
- Loose wires
- Bad Connections
- Loose modules or relays
- Something has been changed around by someone else’s action
Example: someone plugs a wire connector into a wrong plug or someone disconnects something.
ELECTRONIC RESET PROCEDURES
There are 2 ways to reset your game. One is “CB OFF” button and 2nd is game power breaker.
First try the “CB OFF” button located at each end of the game where start and stop push buttons are.
Second turn the game power breaker off at the power panel, wait 15 seconds and turn breaker back on.
Something to remember - 2400 electronic is a computer, if it gets “lost” it must be reset to start over properly.
ACTIVATED SWITCH
Hung or stuck switches can cause an unfair and revenue losing problem. To cure this, our 2400 Electronics senses
this problem before it is too late. If one of the symptoms arise where as the foot-switch was the problem, the unit
simply will not turn on. If you have a footswitch that lights up the I.D. light when turned on, and goes out when
footswitch is released, then you must fix the stuck switch before this unit will turn on.