Bob’s Space Racers® Inc. ©2017
P a g e
|
7
G
AME POWER MUST BE ON TO PERFORM THIS OPERATION
.
Please Note: Read all the instructions before performing any procedures.
3.1 Factory Reset
The reason for a
Factory Reset
is if the
Master
is no longer functioning and you are needing to
turn a known working
Unit
board into a
Master
or change a
Master
board into a
Unit
board.
3.1.1
Take the
Master
or
Unit
board
(Figure 3.1)
and install the board into the board housing
(Figure
3.2)
.
3.1.2
Secure the BSR-3000 board with the 3/8-inch Nylon Hex Standoff
(Figure 3.4)
from the old board.
3.1.3
Plug all the cables into the board
except
the power connector. See Figure 3.5.
Figure 3.3
Figure 3.1
Figure 3.2
Figure 3.4
Power
Connector
Figure 3.5
3/8-inch Nylon
Hex Standoff
Network
Cables
Network
Cables
1. Each connector is keyed.
2. Connections may vary per game.
