Assembly instructions for
SWOOP CHAIR
Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp,
exposed staple tips can cause injury, therefore, for your protection, please remove
any exposed staples used in packing.
1. We recommend that you should assemble this product with the assistance of another person; this will make
assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton
during shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your
newly purchased product correctly and efficiently.
PARTS
�
0
�
�
LIST
(A} Chair Back
(B) Cushion Seat
(C) Front Leg
SIDE CHAIR
1 piece
1 piece
2 pieces
No.
HARDWARE LIST
QUANTITY
1
==8
(L57*4MM) ALLEN KEY
1
piece
(¢5/16*18*1-5/8"L) SHORT BOLT
1
piece
2
�
(¢5/16*13*1.2MM)SPR1NG WASHER
1 piece
(¢5/16*19*1.8MM)FLAT WASHER
1
piece
(¢5/16*18*2-l/2"L) LONG BOLT
8 pieces
3
�
(¢5/16*13*1.2MM)SPR1NG WASHER
8 pieces
(¢5/16*19*1.8MM)FLAT WASHER
8 pieces
Page 1 of 2
