3
4
3
Connect to Power Supply
Plug in BOBOT WIN SPIDER
4
5
4
Press the Power Button
Walking belt auto clean method
Press power button for 2
secondes to turn on your
BOBOT WIN SPIDER
Caution: Before starting, make sure the edge of
BOBOT WIN SPIDER is 8cm or more away
from window frames or corners.
A.
B.
C.
Place your BOBOT WIN SPIDER
on glass, press again the power
button to start.
You can also start it from your
remote control "START" button.
Every time before and after using, the walking belt should be cleaned to prevent
dirt and dust from sticking on, to enhance the performance of machine. Steps to
clean walking belt as follows:
(1) Turns on the machine (press power button).
(2) Put the machine in the reverse direction (belt up) on the workbench.
(3) Press a sensor (any of 4 corners) for about 8 seconds, the machine
automatically enters belt cleaning mode, the drive wheels on both sides
rotate and the vacuum motor stops.
(4) Use a clean cloth, slightly wipe on the belt surface.
(5) After cleaning the belt, press switch button to shut off.
Do not spray water on the glass,
the wet glass will make the
driving tread slip!
The window cleaner must be
connected to the power supply
and safety rope.
while using could lead to
dropping.
