Troubleshooting
Specifications
FAQ
LED works well, no
reaction when press
start/stop button,
liquid spray button,
machine doesn’t work
Water spray failure
Nozzle blocked
Nozzle Leaks
One Green Light on
detachable battery
motors work well.
LED work well,
spraying works well,
motors don’t work
*LED Off
*Spraying failuer
*Motors don’t work
*Lights on battery
pack flicker when
plugged in adapter
Causes
AAA battery runs out
*Lack of water or other liquid
*Air filled in the water pipe
Nozzle blocked
Solid particles in waxing
oil/detergent
Low battery
Over-heated protection
*Over-current protection is
triggered
*Low power
Solutions
Replace AAA battery for the
handle remote control
*Add water or other liquid
*Press spray button several
times to expel air
Use a needle to clean block-
age gently
Rinse the nozzle with clean
water
Recharge battery
Stop using it, switch off the
machine and reuse after it’s
cooled down
Plug in the device for few
seconds to reactivate it
Charge the machine for
several seconds, unplug it
Recharge asap
***IMPORTANT***:
1.Motor temperature increases in the long continuous running. Please make sure to
switch off the machine if overheating protection is triggered. Don't switch the machine
on until it cools down.
2. It's suggested that the machine shall not work for over 20 minutes continuously, as
overheating may cause damage to motor life.
If troubles can't be solved acording to the manual, please contact our after-sale
department for help.
Model No.: MOP 9030
Rated Voltage: DC 14.4V
Rated Power: 60W
Noise Level: <60 dB
Battery Capacity:
2600mAh Lithium
Charging time: 2.5h
Working time:
Water Tank: 300ml
Dimension: 122*39*8.5cm
Net Weight: 3.15kg
Cautions:
A. Make sure the cleaning cloths are used in proper circumstances.
B. Waxing oil is environment friendly and suitable for various floor caring.
However, please avoid excessive use, which may cause the floor too slippery. Normally for
flooring of around 100m2, 80ml of waxing oil should be enough.
C. Empty and dry off the water tank if the machine is to be left unused for a long time.
D. Water tank protection function shall be triggered while water pump works to empty tank
for 3 seconds.
E. Charge the machine with original adaptor in the package only.
4
For continuous product improvement,
we reseve the right to any
and design change
>35min
（
Dry mopping
）
>20min
（
Wet mopping
）
