w w w . B o b L o n g D i r e c t . c o m
1
Vice Low Pressure Regulator:
Your Vice comes equipped with one of the best low pressure regulators on the market.
To ensure the best consistency and the highest flow possible, it is recommended that
you clean and relubricate the low according to the maintenance schedule.
LPR Maintenance:
• Degas your marker and ensure that there
are no paintballs in the breech or barrel of
the marker.
• Remove your macroline hose from the
90˚ fitting on your regulator
• Unscrew your regulator from the Vice
vertical adaptor, and set the vertical
regulator down.
• Grasp the low pressure regulator to ensure
that it does not eject from the marker upon
removal of its retaining screw.
• Remove the LPR retaining screw from in
side the Vice vertical adaptor, and allow
the LPR assembly to slide out of the mark
er.
• Remove the brass LPR adjustment screw
from the LPR assembly by unscrewing it in
the counterclockwise direction.
• Remove the LPR cap from the LPR body by
unscrewing it in the counterclockwise direc
tion.
• Tap the LPR body on a hard, flat surface to
allow the LPR piston, spring, and washer to
slide out of the regulator base.
• Inspect the surface of the piston and oring
for excessive wear or nicks, and replace as
necessary.
• Inspect the interior walls of the LPR body—
if necessary, use a swab on the interior of
the LPR body to clean debris and old
grease.
• Regrease the piston with Dow 55, and
gently replace the piston, spring stack, and
spring follower back into the LPR body.
• Replace and tighten the LPR cap, and rein
sert the brass LPR adjuster screw.
