4
Operation Steps
Connect the massage head when the device is turned off. Insert the
massage head completely with pressure and pull it out when
removing the vibrating head (note: The Fork head should be
positioned for installation. When the buckle is inserted into the slot,
it means the installation is in place. If the massage head is not
installed in place, there will be a risk of falling out while in use.)
Turning the device ON/OFF: Press and hold the “ ” power button
for 2 seconds.
To change the percussion massage frequency when the device is on,
press the button “ ”to turn on the first setting. If you would like to
advance to a higher setting, press the power button “ ”again. The
backlight will indicate the active setting. To pause the massage gun,
press the power button for 2 seconds. Press for 2 seconds again to
resume.
Note:
After 10 minutes of operation, the device will automatically turn off.
The LED light indicates the corresponding strike frequency level, the
lowest at level 1 and the highest at level 5.
When the device is in standby mode (level 0), it will automatically
shut down without any operation for 20 seconds.
1.
3.
A.
B.
C.
2.
