BoarBuster
Color HD Installation Instructions
1.
Remove and unfold
Tripod Tower
then fully extend all legs and lock in place. The Tripod
Tower should be located approximately 15’ to 20’ from the edge of the trap, and the
Winch Stand must be the closest spot on the trap to the
Tripod Tower
.
2.
Slide
Small Solar Power Bracket
on to
Tripod Tower
with the bolt holes facing down at a
45-degree angle on the
Tripod Tower.
3.
Slide
Camera Bracket
on to
Tripod Tower
and use provided pin to lock in place.
4.
Mount
Camera Antenna
to the top of the
Tripod Tower
, then tighten with provided “U”
bolt with a small wrench. Make sure to not overtighten “U” bolt.
5.
Use (3) three of the provided
Stakes
to secure
Tripod Tower
in place to the ground
6.
Attach
Solar Panel
to the
Solar Power Bracket
on the
Tripod Tower
using the provided
bolts making sure the bolt heads are on the panel side of the frame. Ideally the solar
panel should be facing as much to the south as possible to allow it to absorb as much
sunshine as possible.
7.
Place the
Large Solar Panel Bracket
at the bottom of the
Solar Panel
for maximum
support. Secure the
Large Solar Panel Bracket
using supplied bolts and wing nuts. Then
use (2) of the provided
Stakes
to secure to the ground.
8.
Mount
Camera Plate
to the back of the camera making sure that the welded portion is
facing toward the top of the
Camera
. PLEASE DO NOT OVER TIGHTEN.
