516-576-0295 | www.boasecure.com
13
national service providers
electrOnic lOcking SyStem
PrOgrAmming
multi PrOgrAm (7A) – SimPle PrOgrAmming:
This procedure allows you to create multi
green
(add) and
red
(delete) programming keys for simple programming.
To proceed with this function at least one
green
(add) and one
red
(delete) key must already be enrolled into
the lock or controller. The
green
(add) key already enrolled will serve as the “authorization” key.
Steps below will require the following keys:
· multi program (7A)
· pre-enrolled green / add – (used to authorize)
· Additional green / add
· Additional red / delete
1. present and remove the multi program (7A). both green and red led will flash.
2. immediately present and remove pre-enrolled green / add to authorize. green
1. led will flash.
2. immediately present and remove additional green / add key(s)
3. When all green / add keys have been programmed the flashing green led will
4. timeout after about 4-5 seconds and immediately start flashing red.
5. immediately present and remove additional red /delete key(s)
6. When all red / delete keys have been programmed the flashing red led will
7. timeout after about 4-5 seconds and return to a solid red.
8. programming is complete.
All programming keys and any unused user key should be stored in a safe location.
INSTALLER NOTE: Since the wire color may change the clip end is generally positive.
