BNC 745-T Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 35

BNC 745-T Скачать руководство пользователя страница 18

Timing principle using internal trigger

Figure - 14.

Internal Trigger Timing

In Internal trigger mode, two tunable frequencies are available (IN1 and IN2). On Figure - 14, T1

output uses IN1 trigger with a specified delay of 0ps and B output uses IN2 trigger with a non-null

delay.

The MODEL 745-T must be configured (trigger, delay, etc.) before starting any sequences. The

individual Channel Gate Mode is also depicted on Figure - 14. It is obtained by setting general Gate

Mode to “CHANNEL” and channel A Gate mode to “ON”. The result is that the Gate In signal allows

the pulse output of the channel A.

The width parameter doesn’t appear on these two Figures (Figure - 12, Figure - 14). It has to be

noticed that the frequency

f

used as repetitive input trigger (internal or external) and the maximum

width of a corresponding output channel

Tx

are linked by:

𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀ℎ

𝑇𝑇𝑀𝑀

=

1

4

𝑓𝑓

3/2/18

Berkeley Nucleonics Corporation, 2955 Kerner Blvd. San Rafael, CA 94901

[email protected], Call 800-234-7858 or Live-Chat @ www.berkeleynucleonics.com

18 of 35

«
...
16
17
18
19
20
...
»

Содержание 745-T




































Отзывы:

Нет отзывов