BNC 745-T Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 35

BNC 745-T Скачать руководство пользователя страница 29

Web Page control/communication

The user can open a web page to control the MODEL 745-T device via Internet Explorer, Firefox or

Chrome (last versions supported). To access the web page, the IP address of the device has to be

typed in the navigator address field. Once that is done, the user should access to the following page.

Figure - 16.

Configuration page

From that page, the user can configure each output pulse (amplitude, width, trigger, delay, inhibit

and delay reference), trigger settings, internal frequencies, external clock and burst mode.

On the first setting change, the user will be asked for Login and Password (Default Login: BNC,

Default password: bnc).

Status LEDs indicate which outputs are active or not and Fault LEDs warn the user in case of errors.

To refresh led status, the user has to click on one off these LEDs.

The “manual trigger button” is used to trigger a channel sets to SS1, SS2 or LSS (Single shot 1 & 2 and

Local Single Shot)

And at last, the user can access to the password setting page by typing in the address field: “Device

IP/passwd.htm”.

Figure - 17.

Password page

3/2/18

Berkeley Nucleonics Corporation, 2955 Kerner Blvd. San Rafael, CA 94901

[email protected], Call 800-234-7858 or Live-Chat @ www.berkeleynucleonics.com

29 of 35

«
...
27
28
29
30
31
...
»

Содержание 745-T




































Отзывы:

Нет отзывов