BNC 555 Series, Руководство пользователя

Страница: 22 / 47

- 16 -
Recalling a Configuration
Use the following procedure to recall a stored or default system configuration:
• To enter the Recall Menu, press the recall button (fu recall).
• Select a configuration number. Note that configuration 0 is the factory default setting.
• From the Recall Menu, press the recall button (fu recall).
Configuration #
Specifies the location of the system configuration. Numbers range from 0 to n, where n is the
number of stored configuration. Zero is the factory default values.
Name
A label may be added to help identify the configuration. This is a read only field. The label is
changed in the Store menu.
*NOTE: The number of storage locations is model dependent; see the speci-
fications for your model.
• Label the configuration as desired. Press enter key to save label.
• From the Store menu, press the store button (fu store).
Configuration #
Specifies the location to store the current system configuration. Numbers range from 1 to n,
where "n" is the number of stored configuration.
Name
Prior to storing the system configuration, a label may be added to help identify the configuration
later. Enter a new label using the alphanumeric keypad.
RECALL Menu
RECALL Menu
Recall Menu
Configuration #
Name
Help Line
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com