BN Products BNR6502, Руководство по эксплуатации

Страница: 3 / 12

Page | 3
BN Products-USA www.bnproducts.com
PRODUCT DESCRIPTION
From low-viscosity paints to high-viscosity mortars these electric mixers
will get your job done quicker, safer and easier than a conventional ½”
drill motor. The ergonomically designed handles and the variable 2-speed
motor with soft-start make the job quicker, safer and easier. The heavy-du-
ty gearbox and high-torque motor will outlast a standard ½” drill motor by
3-4 times.
The machines have been designed to mix liquid and powder building mate-
rials such as paint, mortar, adhesive, plaster, epoxy and similar substances.
You must abide by certain safety precautions when using the equipment,
in order to prevent injuries and damages from occurring. Therefore you
must always read through this operating manual carefully.
PLEASE NOTE This manual should be kept in a safe place so
that the information that it contains is always available. This
operating manual should accompany the equipment if it is trans-
ferred to someone else.
We do not accept any liability for accidents or damage arising from ignor-
ing this manual and the safety instructions.
SAFETY INSTRUCTIONS
Read through these operating instructions carefully before using these
tools. Become familiar with the functions and method of operation. To en-
sure proper operation, always maintain the tools according to the instruc-
tions. The operating instructions and associated documents should always
be kept close to the appliance.
When using power tools, you· must observe the following basic safety pre-
cautions in order to ensure protection from electric shocks, injury and fire.
Read and follow all the instructions before using these power tools. Follow
the notes on safety.
PLEASE NOTE
Always check to see if voltage corresponds with the
manufacturer’s requirements
Our mixers are double-insulated in accordance with EN60745; therefore, a
ground wire is not required.
USE PROPER EXTENSION CORD: Only use an approved extension cable
that is suitable..for the machine’s power.